Why does the washing machine report an error
Errors on the washing machine display can indicate various problems. Here are some common errors that may appear on the washing machine display:
- E1 - water supply problems. This may be caused by clogged water pipes or faulty water supply to the machine. Solution: check the water supply to the machine and clean the filter on the inlet hose.
- E2 - water drainage problems. Something may be blocking the drain hose or the washing machine's pump is not working. Solution: check the drain hose for obstructions and clean the pump drain filter.
- E3 - water heating problems. This could be caused by a malfunctioning thermostat or heating element. Solution: check the condition and functionality of the heating element and thermostat.
- E4 - filling sensor problem. This may indicate a problem with the water level sensor or the controller. Solution: check the condition of the water level sensor and the corresponding wires.
- E5 - door sensor problem. This may indicate that the washing machine door is not closed or the door sensor is faulty. Solution: make sure that the machine door is properly closed and check the condition of the door sensor.
If you encounter an error not mentioned above, it is recommended to refer to the washing machine user manual or contact an authorized service center for additional assistance and troubleshooting recommendations.